Kenwood R-K1 - Manual (Page 16)

16 EN
ENGLISH
Basic Operation
Each press switches the selection.
1 [MUTE] indicator ON: The muting function is ON.
C D T 0 6 2 : 1 4
2 [MUTE] indicator OFF: The muting function is OFF (can-
celed).
÷ The previous volume resumes when muting is canceled.
÷ Muting is also canceled when the volume is adjusted.
Switching the display brightness (DIMMER)
Each press switches the selection.
1 The brightness drops.
C D T 0 6 2 : 1 4
2 The brightness drops further.
C D T 0 6 2 : 1 4
3 Dimmer function is OFF (canceled).
C D T 0 6 2 : 1 4
Muting audio temporarily (MUTE)
Each press switches the selection.
1 [CD] or [SOURCE] indicator ON: The Source Direct function
is ON.
ON when the [CD] input is
selected
ON when an input source
other than [CD] is selected
2 [CD] or [SOURCE DIRECT] indicator OFF: The Source Direct
function is OFF (canceled).
÷ Do not switch the Source Direct function ON or OFF in the
middle of recording.
÷ When the SOURCE DIRECT function is ON, the tone adjustment
using the BASS and TREBLE keys is defeated.
The audio from the CD or an external source component can be reproduced in highest possible quality by bypassing the tone adjust-
ment circuitry (bass and treble).
Enhancing the audio quality (SOURCE DIRECT)
Adjusting the speaker balance (BALANCE)
To move
toward Right
To move
toward Left
BALANCE
\
Enter the selection
Press within 8 sec.
L - - - - - - - - - R
Balance level display
÷ Press the BALANCE key shortly to display the current speaker
balance. (Begin the balance adjustment within 8 seconds after
the display starts.)
÷ During headphones listening, the speaker balance adjustment
is defeated.
The display brightness can be switched in 3 steps.