High Country Tek emc-3 - Manual (Page 6)

Page 6 of 39
emc-3 Controller Module
User Guide – Rev A
Controller Mechanical information
IMPORTANT NOTE:
Recommended tightening torques for the
securing bolts are as follows:
For a 1/4-20 bolt, SAE Grade 5
DRY Torque: 8 Ft-Lbs
Lubricated Torque: 6.3 Ft-Lbs
Use 0.5” or 12-15mm spaces if mounted to
hot surface 9 i.e. manifold assembly )
Mount with connector facing downwards to
prevent collection of debris and liquids