Red Lion PAXLSG User Manual
Cc us listed us listed, General description, Safety summary

1
1
2
3
4
5
6
7
8
9 10 11
3.60 (91.4)
(44.5)
1.75
(96.5)
3.80
1.95
(49.5)
(2.5)
.10
(104.1)
4.10
(44.5)
1.75
1.8.8.8
mV
3 1/2-DIGIT, 0.56" (14.2 MM) HIGH RED LED READOUT
HIGH SENSITIVITY, 10 MV FULL SCALE
WIDE RANGE GAIN AND OFFSET ADJUSTMENTS
BUILT-IN EXCITATION 5 OR 10 VDC
APPLICABLE AS REGULAR MILLIVOLT INDICATOR
(SINGLE-ENDED OR DIFFERENTIAL INPUT)
SELECTABLE DECIMAL POINTS
OVER-RANGE INDICATION
NEMA 4X/IP65 SEALED FRONT BEZEL
OPTIONAL CUSTOM UNITS OVERLAY WITH BACKLIGHT
GENERAL DESCRIPTION
The Model PAXLSG expands the PAX Lite capabilities into the indication of
pressure, load, force, and other parameters measured with strain gages. The unit
features broad range scaling and can be used with a wide variety of strain gage
resistances and bridge configurations. A built-in excitation source is jumper
selectable for 5 or 10 VDC @ 120 mA maximum, and can power up to four full
350
bridges in load averaging applications. Although designed primarily for
strain-gage indication, the PAXLSG is also ideal for single-ended or differential
millivolt input applications, with full-scale input ranges from 0 to 10 mV thru 0
to 2 VDC. Adjustable scaling and offset allow direct readout in nearly any
engineering unit.
The meter has a NEMA 4X/IP65 sealed bezel and extensive testing of noise
effects to CE requirements, allowing the meter to provide a tough yet reliable
application solution.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
MODEL PAXLSG - PAX LITE STRAIN GAGE METER /
MILLIVOLT
METER
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for mounting clip installation is
2.1" (53.4) H x 5.0" (127) W.
Bulletin No. PAXLSG-B
Drawing No. LP0571
Released 01/12
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
CAUTION: Risk of electric shock.
CC
US LISTED
US LISTED
UL
R
51EB
IND. CONT. EQ.