Vaisala WMT700 - Manual (Page 61)

Chapter 5 ______________________________ Operating WMT700 with WS425 and SDI-12 profiles
VAISALA _______________________________________________________________________ 59
WS425 A/B WAT11 Commands
When the WS425 A/B WAT11 profile is selected, you can poll data
using the following command:
where
= Escape character ASCII 27H
= The WMT700 ID, for example, A
The response is the following:
where
= Start of text character (1 digit)
= The WMT700 identification character, for example, A (one
digit).
= Wind speed (in meters per second) multiplied by 10. For
example, 045 is 4.5 meters per second (three digits).
for example, 73 corresponds to (7*8+3)/64*360 = 332
degrees.
Missing Readings
The WS425 A/B WAT11 message reports missing data as slashes (/////).