Entering configuration mode, Ws425 f/g asos profile, Configurable parameters – Vaisala WMT700 User Manual
Page 46
TECHNICAL REFERENCE___________________________________________________________
44 __________________________________________________________________ M211097EN-C
Entering Configuration Mode
This command switches the serial port to configuration mode. The
command works with any communication profile supported by
WMT700.
$aOPEN
where
$ =
Fixed
text.
a
=
Value of the address parameter. If the value is 0, it
refers to any WMT700 address.
Carriage
return.
Line
feed.
WS425 F/G ASOS Profile
Configurable Parameters
Table 11 on page 45 lists the configurable parameters and their allowed
and default values for the WS425 F/G ASOS profile.