Show firmware version, Show serial number, Configuring analog output – Vaisala DPT146 User Manual

Page 41: Set analog output mode

Chapter 5 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 39

Show Firmware Version

VERS

Example:

vers

DPT146 1.0.23

Show Serial Number

SNUM

Example:

snum

Serial number : F4040027

Configuring Analog Output

Set Analog Output Mode

Use the AMODE command to change the analog output mode:

AMODE [c1 c2]

where
c1 = Channel 1 analog output mode. Available options are:

1 = 0 ... 20 mA

2 = 4 ... 20 mA

4 = 0 ... 5 V

5 = 0 ... 10 V

c2 = Channel 2 analog output mode. Available options are the

same as for channel 1.

Example:

amode 2 5

Ch1 output : 4 ... 20 mA

Ch2 output : 0 ... 10 V