Vaisala DM500 - Manual (Page 111)

Chapter 16 _____________________________________________________ Serial Line Commands
VAISALA ______________________________________________________________________ 109
SCC Sensor Circuit Check
Syntax: SCC ON/OFF xx
where
xx =
checking interval (h)
Example:
>scc
Sensor check : ON 6
>scc on 8
Sensor check : ON 8
SSC Sensor Status Check
Syntax: SSC ON/OFF xx
where
xx =
checking interval (s)
Sets the transient recovery time (or disables transient recovery).
Turns the transient recovery ON/off.
Examples:
>SSC
Status check : OFF 24
>
>SSC ON
Status check : ON 24
>
>SSC ON 15
Status check : ON 15
>
SNUM Outputting the Serial Numbers of DM500
and DMP501
Syntax: SNUM