Wall installation, Figure 17, Hms82/83 wall installation – Vaisala HMDW80 User Manual
Page 27: Figure 18, Securing the cable on a wall
Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 25
Wall installation
1.
Drill two holes for wall plugs 100 mm apart.
2.
Place the wall plugs in the holes.
3.
Mount the transmitter using two screws of sufficient length.
1304-055
Figure 17
HMS82/83 Wall Installation
4.
Plug in the screw terminal block, close the cover, and tighten the
screws.
5.
Secure the cable to the wall using cable ties. Allow some cable to
hang down from the cable gland to prevent water from running to
the transmitter along the cable.
1304-057
Figure 18
Securing the Cable on a Wall
100 mm
Ø 5.5 mm