Posey Bed 8070 - Manual (Page 9)

Posey Bed - 8070 9
Bed Assembly
4. Insert the second screw and locking nut into
the unthreaded second hole (Fig. 3-G). Use a
screwdriver and wrench to tighten (Fig. 3-H).
DO NOT over tighten.
5. Align the two holes on the foot transfer brakes
(Part LL) with the two holes on the foot end of
the bed frame (Fig. 3-I & 3-J).
6. Insert the screws and locking nut into the holes
(Fig. 3-K). Use a screwdriver and wrench to
tighten (Fig. 3-L).
7. Repeat steps 5-6 for part LR.
Fig. 3-H
K
Fig. 3-G
K
Nut
Fig. 3-I
LL
Holes in
frame
Holes in
transfer brakes
Fig. 3-J
Fig. 3-K
Fig. 3-L