Posey Bed 8070 - Manual (Page 17)

Posey Bed - 8070 17
Mattress Installation
Materials:
• Part N (1)
• Assembled Bed Frame with Canopy
If not using the Posey Bed 8070
mattress, a mattress that measures 6” x 36” x 80”
(15 x 91 x 203 cm) must ONLY be used. Any other
size mattress may result in patient injury or death.
1. Completely unzip the mattress compartment.
Orient the mattress with the
label on the foot of the bed (1) before placing it
into the mattress compartment. (Fig. 9-A).
2. Insert the mattress (Part N) into the mattress
compartment (Fig. 9-B).
3. Completely zip the mattress compartment
(Fig. 9-C).
4. Attach the canopy to the bed frame by securing
both bed straps located in the middle of the
long sides of the bed.
The canopy bed straps must
ALWAYS be connected to movable parts of
the bed frame to avoid damaging the mattress
compartment.
5. Insert the strap through the bed frame (Figs. 9-D
& 9-E).
6. Bring the strap up through both D-rings and
then back in between the first and second
D-ring (Figs. 9-F & 9-G).
7. Pull strap straight down to tighten (Fig. 9-H).
8. Repeat on the other side of the bed frame.
Fig. 9-B
Fig. 9-C
Fig. 9-F Fig. 9-G
Fig. 9-H
HEAD FOOT
Fig. 9-A
Bed Assembly
Fig. 9-D
Insert Strap
Through Here
L9350A 112707 www.posey.com
Fig. 9-E