Posey Bed 8070 - Manual (Page 15)

Posey Bed - 8070 15
7. Unzip all horizontal rail zippers-both the long
and short sides.
8. Beginning with one long side, wrap the top
rail section around the foam, pull the canopy
material together, and zip (Fig. 7-E).
NOTE: Ensure the zipper pins are seated properly
(Fig. 7-B).
9. Repeat on the other three sides until the long
and short side rails are covered.
10. Secure each corner cover with the hook and
loop.
11. Conduct a visual check to make sure that no
foam is visible and that all zipper teeth are
engaged.
Canopy Installation
Materials:
• Part O (1)
• Assembled Bed Frame
When zipping the canopy, make
sure the zipper pins are completely seated. Failure
to do this will prevent the zipper from closing
securely, which may lead to unassisted bed exit
and potential patient injury.
To avoid damage to zippers or
fabric, be sure to pull the fabric closed as each
panel is fully zipped (Figs. 7-A & 7-B).
1. Unfold the canopy on the bed.
ALWAYS orient the canopy so
the Instruction Storage Pocket is at the foot of the
bed (Fig. 7-C).
2. Release corner covers.
3. Unzip all four
vertical rail zippers.
4. Beginning with one
corner leg, wrap the
canopy around the
foam, making sure that
the foam is positioned
toward the top of the
frame (Fig. 7-D).
Fig. 7-A Fig. 7-B
.2 23
Fig. 7-C
O
HEAD FOOT
Fig. 7-D
5. Pull the canopy material together and zip only
half-way up (Fig. 7-D).
NOTE: Zipping half-way assists with the
installation of the top portion of the canopy.
6. Repeat on the other three sides until the
corner legs are covered.
NOTE: Ensure the zipper pins are seated properly
(Fig. 7-B).
Fig. 7-E
Bed Assembly