Posey Stop Guard/Do Not Enter Sign - Manual

The Posey Door Guard/Stop Guard and Do Not Enter Sign/Do Not Enter Banner provide a
strong visual reminder to resi dents not to exit through the doorway, or enter “off limit” rooms.
The Door Guard (8210) and Do Not Enter Banner (7998) attach with hook and loop adhesive
strips to the doorframe and remove easily in case of emergency. Both Guards fit doorframes up
to 53” (135 cm) wide. The Stop Guard (8209) and Do Not Enter Sign (7997) attach with hook and
loop adhesive strips directly onto the door.
REF 7997 Do Not Enter Sign (sign only) REF 8209 Stop Guard (sign only)
REF 7998 Do Not Enter Banner (sign and banner) REF 8210 Door Guard (sign and guard)
Inspection
Inspect before each use. Check for broken stitches, or torn, cut or frayed
material. Banner does not prevent residents from exiting through door.
Application Instructions:
7997 and 8209 1. Remove backing from adhesive strips and apply to the front of the door.
7998 and 8210 1. Remove backing from adhesive strips and apply strip vertically to
each side of the doorjamb at approximately waist level.
2. Attach Door Guard/Do Not Enter Banner to each side.
Note: Replacement adhesive strips available at hardware/craft stores.
The Posey Door Guard/Stop Guard and Do Not Enter Sign/Do Not Enter Banner provide a
strong visual reminder to resi dents not to exit through the doorway, or enter “off limit” rooms.
The Door Guard (8210) and Do Not Enter Banner (7998) attach with hook and loop adhesive
strips to the doorframe and remove easily in case of emergency. Both Guards fit doorframes up
to 53” (135 cm) wide. The Stop Guard (8209) and Do Not Enter Sign (7997) attach with hook and
loop adhesive strips directly onto the door.
REF 7997 Do Not Enter Sign (sign only) REF 8209 Stop Guard (sign only)
REF 7998 Do Not Enter Banner (sign and banner) REF 8210 Door Guard (sign and guard)
Inspection
Inspect before each use. Check for broken stitches, or torn, cut or frayed
material. Banner does not prevent residents from exiting through door.
Application Instructions:
7997 and 8209 1. Remove backing from adhesive strips and apply to the front of the door.
7998 and 8210 1. Remove backing from adhesive strips and apply strip vertically to
each side of the doorjamb at approximately waist level.
2. Attach Door Guard/Do Not Enter Banner to each side.
Note: Replacement adhesive strips available at hardware/craft stores.
8209
8209
7997
7997
8210
8210
7998
7998
7997 and 8209 - Wipe with mild soap and water or
disinfectant.
7998 and 8210 - Machine
wash warm, tumble dry low.
7997 and 8209 - Wipe with mild soap and water or
disinfectant.
7998 and 8210 - Machine
wash warm, tumble dry low.
Washing Instructions:
Washing Instructions:
Storage Instructions
This device is designed for use in normal indoor environments.
This device may be stored in ambient warehouse temperatures
at normal humidity levels. Avoid excess moisture or high
humidity that may damage product materials.
Storage Instructions
This device is designed for use in normal indoor environments.
This device may be stored in ambient warehouse temperatures
at normal humidity levels. Avoid excess moisture or high
humidity that may damage product materials.
Disposal
Dispose of per
your facility policy or applicable
local code for BIOHAZARDOUS
material.
Disposal
Dispose of per
your facility policy or applicable
local code for BIOHAZARDOUS
material.
© 2010 Posey Company. All rights reserved.
© 2010 Posey Company. All rights reserved.
M1640 REV B 012110
M1640 REV B 012110
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
FALL MANAGeMeNt
FALL MANAGeMeNt
Posey
®
Door Guard/Stop Guard & Do Not Enter Sign/Banner
Posey
®
Door Guard/Stop Guard & Do Not Enter Sign/Banner