Posey Bed Travel Cover - Manual

© 2010 Posey Company. All rights reserved. M6184 REV D 121610
Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA • www.posey.com
Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or 1.626.443.5014
Posey
®
Bed Travel Cover
The Posey Bed Travel Cover is designed to cover the Posey Bed during
transport. The travel cover can be used with and without a bed
attached. The cover has a clear pouch, which allows you to use your
own labels to identify your units (ex. CLEAN or SOILED, or Canopy
P76739). The cover is simple to use and can be easily laundered.
The Posey Bed Travel Cover should only be used when
the Posey Bed is unoccupied.
REF 8008 Travel Cover for 8040 and 8060 models
REF 8071 Travel Cover for 8070
Application Instructions
To Install:
1. Unfold the cover and unzip at the end of the cover.
2. From one end, place the cover on the top corner, making sure it
drapes over both sides (Fig. 1).
3. Continue to drape the cover over the entire canopy (Figs. 2, 3).
4. Zip end panel to close (Fig. 4).
5. The clear pouch on the end of the cover by the zipper can be used
to identify the canopy at your discretion (Figs. 5, 6).
The 8008 cover has three straps with buckles to help prevent the
canopy from touching the ground during transport when the Posey
Bed is not attached to the bed.
1. Run strap under the mattress compartment.
2. With canopy gathered above strap, connect strap to buckle (Fig. 7).
3. Repeat for each strap (Fig. 8).
Note: The Posey Bed Travel Cover should only be secured with
straps and buckles when the canopy is detached from the bed and
mattress.
To help prevent cross contamination, please launder
the Cover between uses.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5 Fig. 6
8008
Fig. 7 Fig. 8
8071
Cleaning Instructions:
Wipe Clean with intermediate level disinfectant or
machine wash.
NeVeR use any cleaner that
contains Phenol or Benzyl.
Storage and Handling
This device is designed for use in normal indoor environments. This
device may be stored in ambient warehouse temperatures at normal
humidity levels. Avoid excess moisture or high humidity that may
damage product materials.
Disposal
Properly dispose of the product per facility’s policy
for BIOHAZARDOUS materials.