DAVIS Protected Junction Box - Manual

Product #7740
P
R O T E C T E D
J
U N C T I O N
B
O X
The Protected Junction Box may be used in place of the junction box supplied
with your Davis Weather Monitor II
™
or Weather Wizard III
™
. The Protected
Junction Box offers limited protection from radio frequency interference (RFI)
and limited surge protection. It may be placed out of doors, but only if placed
inside one of Davis’s shelters or other weather-proof enclosure. The cable run
between the Protected Junction Box and the station console may be a maximum
of 200' (60 m).
This instruction manual takes you step-by-step through the process required to
connect and mount your Protected Junction Box. Please take the time to read
this manual before beginning the process.
C OMPONENTS
The Protected Junction Box includes the following components. Please make
sure you have all listed components before continuing.
✦ Protected Junction Box
✦ Two 16.5-foot (5 m) Ground
Wires (12 AWG)
✦ Three #6 x 1” (25 mm long)
Self-Threading Screws
✦ Two Cable Ties
✦ Four Adhesive Pads