DAVIS Antenna Mast-Mount Kit for Omni-Directional Antenna - Manual

Product # 7995
A
N T E N N A
M
A S T
- M
O U N T
K
I T
F O R O M N I - D I R E C T I O N A L A N T E N N A
The Antenna Mast-Mount Kit provides hardware for mounting an antenna mast
(provided by the user) on the station’s Sensor Mounting Arm support or other
post or pipe and for mounting a Davis-supplied omni antenna on the mast.
C OMPONENTS
The Antenna Mast-Mount Kit contains the following components. Please make
sure you have all components before continuing.
Tools and Materials Needed
In addition to the components listed above, you may need some of the follow-
ing tools and materials. Please be sure you have everything you need before
beginning the installation.
✦ 3/4" Galvanized Pipe or Antenna Mast, maximum outside diameter of 1-1/4" (32 mm)
✦ Phillips Screw Driver
✦ Slotted Screw Driver
✦ Adjustable Wrench or Socket Set
✦ Electric Drill with 3/16" (4.8 mm) drill bit.
2-3/8" U-Bolts & Hardware
Flat Washer
Split-Lock
5/16" Hex Nut
Saddle
1/4" x 1-1/2" Lag Screws
1/4" Flat Washer
Antenna
Mounting
Bracket
Antenna Mast
Brackets
Flat Washer
Split-Lock
1/4" Hex Nut
Saddle
1-1/2" U-Bolts & Hardware