DAVIS Wireless Temperature Station (6372) Installation Manual - Manual (Page 2)

2
Installation Steps
For ease of installation, please follow steps in the order presented.
• Prepare the temperature station, page 3
• Insert the battery, page 3
• Set the transmitter ID, page 3
• Set ID on the temperature station using DIP switches, page 4
• Set the console to recognize the signals, page 4
• View current temperature, page 5
• (If you don’t see temperature from the correct Station No., put the
transmitter in TEST mode, page 5)
• Choose a location for the wireless temperature station, page 6
• Test transmission from the proposed mounting location, page 7
• Mount the temperature station, page 8
• A note on securing cables, page 10
• Specifications, page 11
For Technical Support, please see “Contacting Davis Instruments” on page 10.