DAVIS Wireless Temperature Station (6372) Installation Manual - Manual (Page 10)

10
A Note on Securing Cables
To prevent fraying or cutting of cables, secure them so they will not whip
about in the wind. Secure a cable to a metal pole by wrapping electrical
tape around them both. Make sure cables are secure by placing clips or ties
approximately every 3 – 5' (1 – 1.6 m).
Cable Clip
Cable Tie
Note: Do not use metal staples or a staple gun to secure cables. Metal staples—especially when
installed with a staple gun—have a tendency to cut the cables.
Contacting Davis Instruments
(510) 732-7814 for Technical Support, Monday – Friday, 7:00 a.m. – 5:30
p.m. Pacific Time.
(800) 678-3669 Toll-Free Order Line, Monday – Friday, 7:00 a.m. – 5:00
p.m. Pacific Time. Our customer service representatives can answer most
questions and assist you with your purchases.
(510) 732-9229 For callers outside the USA or Canada.
(510) 670-0589 Fax to Customer Service or Tech Support.
www.davisnet.com Copies of User Manuals are available on the “Support”
page. Watch for FAQs and other updates. Subscribe to the e-newsletter.
[email protected] E-mail to Technical Support.
[email protected] E-mail to Customer Service.
[email protected] General e-mail.
Note: Please do not return items to the factory for repair without prior authorization.