Telenav for Nextel Supported Devices: v2.2.5 for Motorola i830 User Manual

Page 28

PAGE 28 OF 39

Selecting Backlight allows you to turn the backlight ON, or to turn it OFF. If you select Volume
control you will see the instructions on how to adjust the level for audible guidance instructions.
Selecting Support (listed below Voice Number off the screen shown above) provides you with
TeleNav’s web site URL and customer service phone number.

There are two phone numbers to choose from under Voice Number (#). In some cases, calls placed to
the 877 number do not carry your Caller ID. When this happens you must enter your Nextel phone
number followed by pressing the “#” key, and then enter your TeleNav PIN followed by pressing the “#”
key so that TeleNav can assign the address you dictate to your account. If the automated attendant
asks for account number in the geographical area where you most frequently use TeleNav, you should
try the 408 number. Ease of using the Voice Address Input system is probably a more important
consideration than the minor change in your Nextel billing.

You set preferences for other TeleNav features using the TeleNav website as described below.

Address Entry

Addresses can be entered several different ways:

1. Call the Voice Address Input System and dictate the address. This can be done before

launching the TeleNav Java application, or from within the TeleNav application.

2. Use the TeleNav website.

3. Type in the address in the address fields in the Java application on your phone using the

keypad

4. Transfer an address from the Biz finder Save for later feature as explained above, or

5. Use a marked Waypoint as an address (provided that it is close enough to street or road to

have a valid address.)

After you use method 1 or 2, be sure to use the Refresh list feature to update the list of addresses
appearing on TeleNav on your phone.