DiabloSport Extreme PowerPuck - Manual (Page 31)

INSTALLATION
w w w .
D I A B L O S P O R T
. C O M
3. Locate your vehicle’s MAP sensor.
4. For LB7 Applications the MAP sensor will be located under
your vehicle’s air intake module on top of the vehicle’s engine.
In order to access the MAP sensor you will need to remove the
intake box and tube.
5. For LLY Applications the MAP sensor will be located directly
behind your vehicle’s AC compressor. In order to access the
MAP sensor you might need to remove the belt and the bolts
(15mm) holding the compressor in place. CAUTION: Do not
remove any of the lines leading into the compressor. After the
bolts have been removed just move the compressor
slightly to the side.
16
2001-2005 GM Duramax
LB7 & LL
Y 6
.6L