DiabloSport Extreme PowerPuck - Manual (Page 26)

INSTALLATION
w w w .
D I A B L O S P O R T
. C O M
5. Carefully screw the supplied nut tool onto the valve.
Place the fuel rail valve into a vice. The vice should
clamp down on the sides of the valve cap.
6. In order to remove the valve cap, carefully unscrew the nut.
CAUTION: This piece is spring loaded. Be sure that you are
holding the end of the valve while unscrewing to prevent
a possible loss of parts. When removing the cap take note
of how the holes inside the cap lined up with the spring.
11
2007.5+ Dod
ge 6
.7L