Boonton PIM 31 User Manual - Manual (Page 94)

94
Appendix A
Warranty Statement
Boonton Electronics warrants the PIM 31to the original Purchaser to be free from
defects in material and workmanship and to operate within applicable
specifications for a period of two years from date of shipment. Test cable(s) and
connector savers are not covered under warranty. Boonton Electronics further
warrants that its instruments will perform within all current specifications under
normal use and service for two years from date of shipment. These warranties do
not cover sealed assemblies which have been opened, or any item which has
been repaired or altered without Boonton’s authorization. Boonton’s warranties
are limited to either the repair or replacement, at Boonton’s option, of any product
found to be defective under the terms of these warranties. There will be no
charge for parts and labor during the warranty period. The Purchaser shall
prepay inbound shipping charges to Boonton or its designated service facility and
shall return the product in its original or an equivalent shipping container.
Boonton or its designated service facility shall pay shipping charges to return the
product to the Purchaser for domestic shipping addresses. For addresses
outside the United States, the Purchaser is responsible for prepaying all shipping
charges, duties and taxes (both inbound and outbound).
At Boonton's option, an extended Warranty period may be available for an
additional charge. Please contact one of our sales offices for further information.
If an extended warranty option has been purchased, the extended period is
substituted for the 2 year period above. Note that the extended warranty does not
extend the instrument's calibration interval past 12 months. The instrument must
be maintained in a calibrated (instrument having received calibration or
verification at recommended interval) state throughout the warranty period to be
eligible for warranty service to remedy "out of spec" operation.