Boonton PIM 31 User Manual - Manual (Page 65)

65
8.2 System Management
8.2.1 Self Check
Self check provides information about the PIM 31 test system. To
allow the self check routine to test all modules, it needs to be
performed with RF Power ON
Name Description
HPAx Output RF Output power level (should be +/- 0.2
db within the set limits – ALC ON)
HPAx ON/OFF Status of RF Power (ON/OFF)
HPAx Temperature Temperature of amplifiers.
HPAx Over Power Reverse Power
HPAx Temp Status On Fail (too hot), System will shut down
Synthesizerx Lock Synthesizers of Transmitter and Receiver
locked
HPAx Reverse Reverse PIM measurement blocks status
Local Osc Lock Local Oscillator functionality
Fan Operating Operation status of 6 fans