3 performance verification, 1 tx signal power level, Performance verification – Boonton PIM 31 User Manual User Manual

Page 86: Tx signal power level

Text mode
Original mode

13.3 Performance Verification

Performance Verification measures output signals and frequency accuracy /
selectivity of the PIM31.

13.3.1 Tx Signal Power Level

The following components are required for the performance verification.

• 50W Low-PIM Termination Load (Boonton 95960501A)
• Low PIM Cable (Boonton: 95960401A)
• High Power coupler 30dB coupling (with known linearity)
• RF Power Meter (Boonton 4540 w/ Sensor 51071A)

Install the test set-up as shown: