Boonton PIM 31 User Manual - Manual (Page 71)

71
9.2.2 List of remote commands
Below are the lists of remote commands which can be executed remotely either
by using Telnet or HyperTerminal with a regular type of LAN cable connection
to the PIM31 unit. It is recommended to add “\r\n” at the end of each remote
command if proprietary applications to execute the following commands are
used. This avoids problems to complete the command executions.
Command Parameter Return value Unit Description
*IDN? Product, Model
*RST
SET
F1 Frequency 1,0 MHz 1:True , 0:False(Out of Range)
F2 Frequency 1,0 MHz 1:True , 0:False(Out of Range)
P1 Power 1,0 dBm 1:True , 0:False(Out of Range)
P2 Power 1,0 dBm 1:True , 0:False(Out of Range)
ALC
ON, 1 1,0 1:True , 0:False
OFF,0 1,0 1:True , 0:False
BW index 1,0 1:True , 0:False
RF
ON, 1 1,0 1:True , 0:False
OFF,0 1,0 1:True , 0:False
GET
STAtus
F1,F2,P1,P2,
ALC,BW,RF
F1 Frequency MHz
F2 Frequency MHz
P1 Power dBm
P2 Power dBm
ALC 1,0
BW index
RF 1,0
ERRor Last Error Error Log of Last command
PIM
PIM, Order,
IM Frequency
RSSI RSSI