Boonton 4530 Peak Power Meter User Manual - Manual (Page 123)

4-49
Boonton Electronics Chapter 4
4530 Series RF Power Meter Remote Operation
SYSTem:LIGHT
Description: Set or return the display backlight status. OFF = always off, ON = always on, ON_1 and
ON_5 = on at any key press, off after 1 or 5 minutes of keyboard inactivity,
Syntax: SYSTem:LIGHT
Argument: = ON, OFF, ON_1, ON_5
Valid Modes: Any
SYSTem:COMMunicate:SERial:BAUD
Description: Set or return the serial port baud rate.
Syntax: SYSTem:COMMunicate:SERial:BAUD
Argument: = 1200, 2400, 4800, 9600, 19200, 38400
Valid Modes: Any
SYSTem:COMMunicate:SERial:BITS
Description: Set or return the number of serial port data bits.
Syntax: SYSTem:COMMunicate:SERial:BITS
Argument: = 7 or 8
Valid Modes: Any
SYSTem:COMMunicate:SERial:SBITs
Description: Set or return the number of serial port stop bits.
Syntax: SYSTem:COMMunicate:SERial:SBITs
Argument: = 1 or 2
Valid Modes: Any
SYSTem:COMMunicate:SERial:PARity
Description: Set or return the serial port parity status to NONE, ODD or EVEN.
Syntax: SYSTem:COMMunicate:SERial:PARity
Argument: = NONE, ODD, EVEN
Valid Modes: Any
SYSTem:COMMunicate:SERial:CONTrol:RTS
Description: Set or return the serial port handshake mode for the RTS line. ON = use as handshake line,
OFF = always deassert. The DTR line is always asserted.
Syntax: SYSTem:COMMunicate:SERial:CONTrol:RTS
Argument: = OFF, ON
Valid Modes: Any