Ag Leader SMS Mobile Sensors Quick Start Guide User Manual

Page 35

Text mode
Original mode

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013

11.

Tap the Test Sensor button. When prompted to turn on the sensor, turn it on and
then tap OK.

If the sensor is configured correctly you will receive a message indicating that
the sensor message was received and that it is connected.

If the sensor is not configured correctly you will receive a message indicating
that the sensor was not found, please check sensor connections and settings.

12.

After testing the sensor tap OK.

13.

Select the Attributes you wish to log from the sensor by placing a check mark in the
box next to their name. Tap OK when finished.

14.

The sensor will now appear in the list of Available Sensor Configurations and can be
used to record data within the designated operating mode.