Ag Leader SMS Mobile Sensors Quick Start Guide - Manual (Page 13)

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved 12
9. On the Sensor Port/Connection Settings window the settings to use with the Geonics
Sensor will be predefined for you:
a. Geonics EM38/38-B/38-DD:
i. Serial Port: COM1
ii. Baud Rate: 9600
iii. Data Bits: 8
iv. Parity: None
v. Stop Bits: 1
b. Geonics EM38-MK2:
i. Serial Port: COM1
ii. Baud Rate: 19200
iii. Data Bits: 8
iv. Parity: None
v. Stop Bits: 1
10. Tap Test Sensor.
a. Tap OK after turning on the Geonics Sensor. The EM38 will need to be in Q/P
Mode and not I/P Mode.
b. Once testing is complete you should receive a message indicating that
messages have been received and that it is connected.
c. Tap OK.