Ag Leader ParaDyme SAM Code Upload User Manual - Manual (Page 5)

2202 South Riverside Drive, Ames, IA 50010
Phone: 515-232-5363 Internet: http://www.agleader.com
P/N 4002312
Rev B
While the application performs the code upload, the progress bar will increase. If the process gets
interrupted during the upload, refer to the troubleshooting section. Once the firmware has
successfully uploaded, the application displays the message "Upload successful!" in the status
bar while the SA Module is rebooting as shown in Figure 7.
Figure 7 – SA Module Firmware successfully uploaded
After the SA Module has re-started, the Current SAM FW and Hardware information should be
updated showing the firmware version that was uploaded as shown in Figure 8.
Figure 8 – Window update after code upload
The SA Module has now been successfully uploaded. The program can be closed and the SA
Module programming cable can be removed. Reconnect the original harness connections as they
were for vehicle operations.