Ag Leader ParaDyme SAM Code Upload User Manual - Manual (Page 4)

2202 South Riverside Drive, Ames, IA 50010
Phone: 515-232-5363 Internet: http://www.agleader.com
P/N 4002312
Rev B
After pressing the Get SAM Info button, the application displays the information of the current
SA Module. It displays the Current SAM FW Version, Current FW Build Date & Time, Current
FW Identification,
and the Current SAM HW Type. This information drives the choice of
firmware that can be uploaded to the SA Module. Figure 5 shows the application window with
the SA Module info.
Figure 5 – SA Module info on display
The user can now select the firmware version to upload to the SA Module. Once the Select
Firmware to Upload
has been selected, the Upload Firmware button becomes enabled as shown
in Figure 6 and the application is ready to start the code upload to the SA Module. Press the
Upload Firmware button to begin the process.
Figure 6 – SA Module ready to upload