Ag Leader Intellislope CAN Simulator Operation - Manual (Page 3)

b. Go to: Edit -> Preferences
i. Change “Elevation Model to “Ripple”
ii. Adjust “Max Elevation Change” “Max Grade” & “Avg Eastward Grade” to vary
the amount of grade and ripple you would like. Check elevation model on the
main simulator page.
iii. Click “Apply” & “OK”
iv. NOTE: When using “Sample tile path 8-27-12.gps” These setting may be
ignored, as they have the elevation from when the playback was made
c. Go to: Settings ->CAN…
i. Change Hardware type to “Systec USB-CAN”
ii. Click “Apply”
iii. Click “OK”
d. Go to: Settings ->GPS… -> Receiver 1
i. Change Protocol to “NMEA 2000 (CAN)”
ii. Change Fix Quality to “RTK”
iii. Change Satellites to “8”
Page 3 of 5