Ag Leader L160 - Lightbar User Guide - Manual (Page 2)

2
A
BOUT THE
L160
The L160 is a user-friendly lightbar with 16 tracking LED lights that indicate the vehicle’s position
in relation to the guidance line. The four LEDs in the middle of the lightbar are green and
indicate an “on-line” status. As the vehicle moves off-line to the right or left, yellow LEDs
illuminate and indicate the direction off-line. The Liquid Crystal Display (LCD) gives the operator
the current distance right or left from the guidance line as well as the current pass number and
degree heading. A RAM mount with a suction cup base offers unlimited mounting options. A
single cable connection provides a clean installation without cluttering the operator’s view.
LCD S
CREEN
The L160 features a 50mm X 25mm LCD screen.
Do not use any harsh chemicals to clean the L160, as these could discolor or damage the graphic
overlay and LCD screen.
An anti-static wipe made for computer screens or a damp cloth is the correct way to clean the
screen and the L160 enclosure.
CAN-B
US
T
ECHNOLOGY
The L160 is connected to, and powered by the display, which uses Controller Area Network (CAN)
technology.
Note: The L160 does not have its own power source, but is powered through the display.
E
QUIPMENT
S
PECIFICATIONS
• Storage Temperature: -30°C to +70°C
• Operating Temperature: -10°C to +65°C
• Operating Input Voltage: 9 –16 V DC
• Peak Current Draw: 300 mA (5 Watts)
• Humidity - 100% condensing
• IP Rating ID - IP54
CAUTION: Exceeding these specifications may result in degraded operation and/or damage to the display.
CAUTION: The L160 is not to be used in a manner other than intended or described in this manual.