Ag Leader Versa DirectCommand Strip-Till Quick Reference Guides - Manual (Page 7)

PN ?????? Rev A
PN 2006313 Rev A 7
7
DirectCommand TM
Strip Till / Air Cart
Quick Reference Guide
AL: 2006315 - ENG Rev B
Product Density
value (lb/ft 3 ), is stored with each product, use
numeric keypad to edit
Conveyor Rate
volume of product dispensed (ft 3 /rev) by one
revolution of the meter drive shaft
performs automated routine to
calibrate each metering circuit while
machine is stationary
performs automated routine to adjust
the calibration number for the selected
metering circuit if there is a difference
between the amount of product logged
compared to what was actually applied
20 700
Strip Till Control button
- on/off state of control channel
- shaft speed RPM
- fan speed RPM
Press button to display Strip Till Control window.
Air Cart Prime
Press the Prime button to access the Air Cart
Prime window.
User defined revolutions necessary to prime
meter shafts.
Independent settings for each metering circuit.
Product
Density
Conveyor 1
Rate
0.64 ft 3 /rev
Channel 2 Channel 1
Wheat
Strip Till Control
58 lb/ft 3
Static
Calibration
In-Field
Calibration
Prime
Static
Calibration
In-Field
Calibration
Start
Prime
Channel 1
Revolutions
0.25
Channel 2
Revolutions
Channel 3
Revolutions
0.25
0.25
RPM
Start
Prime
1
DAP
bu/ac
0.00
9.0
mph
70.6
ac
0
1 2
25 25 700 25
1 2
0.00
0.00
0.00
0.00
0.00
bu/ac
bu/ac
Potash
Wheat
2
0.00
0.00
Flow: 0.00 bu/min
80 ft 0 in 100%
1 2 3 3
025
Wheat
Rate
124 +
104 - 124
84 - 104
64 - 84
44 - 64
0 - 44
3
Channel 3
RPM
0