Ag Leader Versa DirectCommand Sprayer Quick Reference Guides User Manual
Directcommand, Sprayer, Quick reference guide

PN ?????? Rev A
PN 2006313 Rev A
1
1
DirectCommand
TM
Sprayer
Quick Reference Guide
AL: 2006310 - ENG Rev B
Pressure Sensor Calibration - Calibrate Main, Agitation or Auxiliary sensors
Flow Meter Calibration
pulses/gallon found on flow meter
(for Raven divide by 10)
Flow Control Delay
used to eliminate unwanted flow corrections at the start
of pass, typical setting = 1 –2 sec
Control Valve Settings
opens Control Valve Settings screen
(discussed on next page)
Rate Off: Flow Control Valve
Close: closes control valve when all booms are off
Hold: maintains control valve position when all booms
are off
Rate Off: Auxiliary Valve 1 & 2
when boom sections are off, closes or opens an
auxiliary valve Settings for up to 2 valves
Allowable Error
error allowed before flow rate changes
Threshhold and Timeout - duration and error
allowed before “Rate Not Responding” alarm
Create Configuration
Enter Settings
Start of Configuration Wizard
Press to Highlight Configuration
4930rx
Application
Configuration
Product
Application
Calibrate
Pressure
Controller
Settings
Calibrate
Pressure
Controller
Settings
Controller Settings
Control Valve
Settings
Flow Meter Calibration
120 pls/gal
Flow Control Delay
0 s
Rate Off
Flow Control Valve
Auxiliary Valve 1
Auxiliary Valve 2
Close
Close
Rate Error Alarm
Timeout
Hold
Threshold
5 s
30 %