Ag Leader InSight Flow Meter - Manual (Page 8)

Part No. 2002831-32 Rev. B 8
Section 5: Key Settings/Functionality
Flow Meter Run Screen Settings
You can use the Run Screen
swath section buttons to turn
off individual section logging
on the InSight display if you
wish to apply product using
less than a full swath width.
Note: Turning the Flow Meter
section logging on and off in
the InSight display does not
actually affect their in-field
performance – only their
InSight display logging status.
The swath section width
displays swath width.
Area will automatically be
counted when the InSight
display is recording pulses
from the flow meter and the
display shows a ground speed.
The button should read Auto
to count area. If you do not
want to count area when you
are applying product, press the
Auto button to disable the area
count. The button will display
Off.
The Master Switch Indicator
shows if the master switch is
on (green) or off (red). The
master switch is shown in the
F1 position on the Auxiliary
Input Settings window.