HP OmniBook 5500 Notebook PC - Manual (Page 25)

25
1. Hold the disk with its face up, then slide it into the floppy drive slot until it clicks
into place.
2. To remove the floppy disk, press the eject button.
To install the CD-ROM drive
1. If necessary, remove the floppy drive or super battery from the OmniBook.
2. Slide the CD-ROM drive into the OmniBook until it clicks into place.
To insert and remove a CD
When the OmniBook is reading data from the CD-ROM drive, the
CD disk icon appears on the Status panel.
Caution
Do not insert or remove a CD while the OmniBook is actively reading data.
Wait until the CD-ROM drive is done—otherwise, the OmniBook could stop
responding.
1. Press the open button on the front of the CD-ROM drive .