HP OmniBook 5500 Notebook PC - Manual (Page 23)

23
In this section you’ll learn how to
• Install a floppy disk drive.
• Remove the CD-ROM or floppy drive.
• Insert and remove a floppy disk.
• Install a CD-ROM drive.
• Insert and remove a CD.
• Insert a PC card.
•
Remove a PC card.
To install the floppy drive
You can install the floppy drive or attach it externally to the parallel port.
1. If necessary, remove the CD-ROM drive (or super battery) from the OmniBook.
2. Slide the floppy drive into the OmniBook until it clicks into place.