HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 173)

Troubleshooting 14–9
Bluetooth
For more information on Bluetooth, refer to Chapter 9, “Using Bluetooth.”
Problem Solution
I cannot discover
another Bluetooth
HP iPAQ.
• Be sure Bluetooth is turned on.
• Move closer to the other device.
• Be sure you have not limited your ability to see devices.
• Be sure the device you are attempting to connect to is on and
allows access to being discovered by other devices.
I can see other
HP iPAQs, but I
cannot connect or
exchange data with
them.
• Be sure Bluetooth is turned on.
• Be sure your device has been set up to allow other devices to
connect and your service settings are enabled.
• Move closer to the device.
• Be sure the other device has not restricted your access.
• Try initiating pairing from the other device. Some Bluetooth-
enabled device can only initiate pairing and cannot respond to
pairing requests from other devices.
Other HP iPAQs
cannot find or
connect to my
HP iPAQ.
• Be sure Bluetooth is turned on.
• Move closer to the other device.
• Be sure you have not restricted other devices from finding yours.
• Check your Bluetooth settings to ensure you have allowed your
device to be discovered and others to connect.
Other devices do
not receive my
correct business
card information.
• Be sure you have correctly set up your business card information in
Bluetooth Settings.
• Check Bluetooth Settings to be sure you have not restricted
this function.
The HP iPAQ cannot
find my Bluetooth-
enabled Mobile
phone.
• Be sure your mobile phone is in discoverable mode.
• Contact your mobile phone manufacturer and ask if there is a
firmware upgrade.