HP ProLiant DL360 G5 Server - Manual (Page 49)

Hardware options installation 49
7. Install the PCI-X riser board on the riser board assembly.
8. Install a PCI-X expansion board (" Installing an expansion board " on page 46 ).
9. Install the PCI riser board assembly (on page 21 ).
10. Install the access panel (on page 20 ).
11. Slide the server into the rack.
12. Power up the server (on page 18 ).
HP Smart Array controller options
The server supports two integrated Smart Array controllers. Upgrade options exist for both integrated
array controllers.
HP Smart
Array E200i
Controller HP Smart
Array P400i
Controller PCI controller PCI controller
and P400i
Channel A 1-4 1-4 1-4 1-4 (PCI)
Channel B None 5-6* 5-6 5-6 (P400i)
Standard cache 64 MB 256 MB None 256 MB
Standard
battery None Yes* None Yes*
Optional cache 128 MB 512 MB None None
Optional battery Yes Yes Yes Yes
*Available in some configurations.
For a list of supported options, see the QuickSpecs on the HP website ( http://www.hp.com/support ).
For instructions on installing optional configurations see the procedures in this guide:
• Upgrading an HP Smart Array E200i Controller cache module and battery pack (on page 52 )
• Installing an HP Smart Array P400i Controller cache module and battery pack (on page 55 )
• Upgrading the HP Smart Array P400i Controller to support six hard drives (on page 59 )
• Using a PCI SAS or SATA array controller to support six hard drives (on page 60 )