HP ProLiant DL360 G5 Server - Manual (Page 43)

Hardware options installation 43
3. Install the hot-plug hard drive.
4. Determine the status of the hot-plug hard drive by observing the drive LEDs (" SAS and SATA hard
drive LED combinations " on page 16 ).
5. Resume normal server operations.
Multibay device options
Several multibay devices can be installed in the server. For a list of supported multibay devices, refer to
the QuickSpecs on the HP website (
http://www.hp.com/support ).
To install the component:
1. Power down the server (on page 18 ).
NOTE: Access to the ejector button is intentionally restricted. To eject the optical device, push the ejector
button with a small flat object such as a key or pen.
2. Push the multibay drive ejector button to eject the device or blank.