HP ProLiant DL360 G5 Server - Manual (Page 42)

Hardware options installation 42
Removing a hot-plug SAS or SATA hard drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Installing a hot-plug SAS or SATA hard drive
1. Remove one of the following:
• Hard drive blank (" Removing hard drive blanks " on page 41 )
• Hot-plug hard drive (" Removing a hot-plug SAS or SATA hard drive " on page 42 )
2. Prepare the hard drive.