HP Photosmart 375 Compact Photo Printer User Manual
Page 46
If the optional HP Photosmart Internal Battery is installed in the printer:
Unplug the printer power cord, if it is plugged in. Open the battery compartment
cover and remove the battery. Wait about 10 seconds, then reinstall the battery. If
desired, plug in the power cord. Turn on the printer.
●
The memory card may contain file types the printer cannot read directly from the
memory card.
–
Save the photos to a computer, then print them from the computer. For more
information, see the documentation that came with the camera and the
onscreen HP Photosmart Printer Help.
–
The next time you take photos, set the digital camera to save them in a file
format the printer can read directly from the memory card. For a list of
supported file formats, see
. For instructions on setting the
digital camera to save photos in specific file formats, see the documentation
that came with the camera.
The printer is plugged in, but it will not turn on.
●
The printer may have drawn too much power.
If the optional HP Photosmart Internal Battery is not installed in the printer:
Unplug the printer power cord. Wait about 10 seconds, then plug the power cord
back in. Turn on the printer.
If the optional HP Photosmart Internal Battery is installed in the printer:
Unplug the printer power cord, if it is plugged in. Open the battery compartment
cover and remove the battery. Wait about 10 seconds, then reinstall the battery. If
desired, plug in the power cord. Turn on the printer.
●
The printer may be plugged into a power strip that is turned off. Turn on the
power strip, then turn on the printer.
The optional HP Photosmart Internal Battery is installed in the printer, but the
printer will not turn on using battery power.
●
The battery may need to be charged. Plug in the printer power cord to charge the
battery. The On light flashes green to indicate that the battery is charging.
●
If the battery is charged, try removing and reinstalling the battery.
The optional HP Photosmart Internal Battery is installed in the printer, but it will
not charge.
●
Open the battery compartment cover. Remove the battery and reinstall it. For
more information on how to install the battery, see the documentation that came
with the battery.
●
Check that the printer power cord is securely connected to both the printer and
the power source. When the printer is turned off, the On light flashes green to
indicate that the battery is charging.
●
Turn on the printer. The battery charging icon, a lightning bolt, flashes above the
battery icon on the printer screen to indicate that the battery is charging.
●
An empty battery should fully charge in approximately four hours when the printer
is not in use. If the battery still does not charge, replace it.
HP Photosmart 370 series User's Guide
43