HP Photosmart 375 Compact Photo Printer - Manual (Page 41)

Storing the print cartridges
When you store or transport the printer, always leave the active print cartridge inside
the printer. The printer stores the print cartridge in a protective cap during the power-
down cycle.
Caution Make sure the printer completes its power-down cycle before you
unplug the power cord or remove the internal battery. This allows the printer to
store the print cartridge properly.
Follow these tips to help maintain HP print cartridges and ensure consistent print
quality:
●
When you remove a print cartridge from the printer, store it in a print cartridge
protector to prevent the ink from drying out.
In some countries/regions the cartridge protector is not included with the printer,
but comes with the Gray Photo cartridge that can be purchased separately. In
other countries/regions, the protector might be included with the printer.
● Keep all unused print cartridges in their original sealed packages until they are
needed. Store print cartridges at room temperature (15–35 degrees C or 59–95
degrees F).
● Do not remove the plastic tape covering the ink nozzles until you are ready to
install the print cartridge in the printer. If the plastic tape has been removed from
the print cartridge, do not attempt to reattach it. Reattaching the tape damages
the print cartridge.
Maintaining the quality of photo paper
For best results with photo paper, follow the guidelines in this section.
Storing photo paper
● Store the photo paper in its original packaging or in a resealable plastic bag.
● Store the packaged photo paper on a flat, cool, and dry surface.
● Return unused photo paper to the plastic bag. Paper left in the printer or exposed
to the elements may curl.
Handling photo paper
● Always hold photo paper by the edges to avoid fingerprints.
● If the photo paper has curled edges, place it in its plastic storage bag and gently
bend it in the opposite direction of the curl until the paper lies flat.
Chapter 5
38 HP Photosmart 370 series