HP Photosmart 375 Compact Photo Printer - Manual (Page 39)

6. When the printer finishes cleaning the cartridge and prints a test page, it asks
whether you want to
Continue to second level cleaning . Check the test page
and select from the following options:
–
If the test page has white streaks or missing colors, the print cartridge needs
to be cleaned again. Select
Yes , then press OK .
– If the print quality of the test page looks good, select No , then press OK .
You can clean the cartridge up to three times. Each successive cleaning is more
thorough and uses more ink.
If you complete all three levels of cleaning using this procedure and you still notice
white streaks or missing colors on the test page, you may need to replace the cartridge.
Note If the cartridge or printer has been recently dropped, you may also see
white streaks or missing colors in your prints. This problem is temporary and
clears up within 24 hours.
Printing a test page
Print a test page before contacting HP Customer Care. The test page contains
diagnostic information you can use when working with HP Customer Care to solve
printing problems. Look at the ink nozzle pattern on the test page to check the ink
level and condition of the print cartridge. If any line or color is missing from the
pattern, try cleaning the print cartridge. For more information, see
Automatically
cleaning the print cartridge .
1. Press Menu .
2. Select Tools , then press OK .
3. Select Print test page , then press OK .
4. Following the directions on the printer screen, load paper so the printer can print
a test page. Use plain paper or index cards to conserve photo paper.
5. Press OK to begin printing the test page.
Aligning the print cartridge
The first time you install a print cartridge in the printer, the printer aligns it
automatically. However, if colors in the printouts are misaligned, or if the alignment
Chapter 5
36 HP Photosmart 370 series