HP ProLiant MicroServer Gen8 - Manual (Page 57)

Cabling 57
Cabling
Cabling overview
This section provides guidelines that help you make informed decisions about cabling the server and
hardware options to optimize performance.
For information on cabling peripheral components, refer to the white paper on high-density deployment at
the HP website ( http://www.hp.com/products/servers/platforms ).
CAUTION: When routing cables, always be sure that the cables are not in a position where they
can be pinched or crimped.
Four-bay LFF non-hot-plug drive cabling
The four-bay LFF non-hot-plug drive cable assembly consists of the drive power and Mini-SAS cables attached
to a bracket. If either the drive power or Mini-SAS cable becomes defective, the entire cable assembly will
need to be replaced (spare PN: 724493-001).
• Mini-SAS cable connected to the system board
Item Description
1
4-pin power cable (connected to the PSU P2 cable)
2 Mini-SAS cable