beautypg.com

HP Z210 Convertible Minitower-Workstation User Manual

Page 66

background image

8.

Connect the power cable (1) and data cable (2) to the rear of the optical drive.

Figure 10-10

Connecting the power and data cables

9.

Carefully rotate the drive cage back down to its normal position.

CAUTION:

Be careful not to pinch any cables or wires when rotating the drive cage down.

10.

Replace the front bezel with any bezel blanks removed as applicable.

11.

Replace all components that were removed in preparation for component installation.

58

Chapter 10 Installing optical disk drives

ENWW