HP Z210 Convertible Minitower-Workstation - Manual (Page 49)

8 Installing PCI/PCIe devices
This section describes how to install a PCI or PCIe card in the workstation. To increase the performance
and functionality of your system, PCI/PCIe devices such as graphics cards or audio cards can be
installed in the expansion card slots on the workstation.
Expansion card slot identification
The following tables describe the expansion card slots in the HP Z210 Workstations.
Z210 CMT Z210 SFF
Slot description Slot power Slot description Slot power
1–PCIe2 - x8(4) 25W 1–PCI 32b/33Mhz 25W
2–PCIe2 - x16 75W 2–PCIe2 - x16 45W
3–PCIe2 - x1 10W 3–PCIe2 - x16 (4) 25W
4–PCIe2 - x16(4) 25W 4–PCIe2 - x1 10W
5–PCIe2 - x1 10W
6–PCI 32b/33Mhz 25W
7–PCI 32b/33Mhz 25W
NOTE: The x1, x4, x8, and x16 designators describe the mechanical (physical) length of the slot.
The number in parentheses lists the number of electrical PCIe lanes routed to the expansion slot. For
example, x8(4) means that the expansion slot is mechanically a x8 length connector, with four PCIe
lanes connected.
ENWW Expansion card slot identification 41