Installing memory, Supported memory configurations, 7 installing memory – HP Z210 Convertible Minitower-Workstation User Manual
Page 46
7 Installing memory
This section describes how to add memory to your workstation.
Supported memory configurations
for specific DIMM compatibility
information for HP workstations.
NOTE:
— Install only HP-approved, unbuffered DDR3 DIMMs.
— HP Z210 CMT and SFF Workstations support Error Checking and Correcting (ECC) and non-ECC
DIMM memory modules.
— Do not intermix ECC and non-ECC memory. The system will not boot and will produce a memory
error.
— For maximum performance, install DIMM memory modules in pairs of the same size.
— Install DIMM memory modules in the order shown below.
The following table describes the memory configurations supported by the HP Z210 Workstations.
Z210 CMT
Z210 SFF
Supported configurations
●
Four DIMM slots
●
Memory configuration from 1 GB to 32 GB
Supported configurations
●
Four DIMM slots
●
Memory configuration from 1 GB to 32 GB
DIMM installation order
DIMM installation order
38
Chapter 7 Installing memory
ENWW