HP Netserver E Server series - Manual (Page 45)

Chapter 5 Troubleshooting
39
Battery System Board
Figure 5-1. Battery on System Board
4. Insert the new battery with the positive sign (+) facing out, and ensure
that it is seated completely. Make sure that the retaining clip is in place,
and holds the battery firmly.
5. Replace the cooling duct/cover and the NetServer cover.
Problems Running the Setup Program
If you cannot run the Setup program, the NetServer’s configuration in CMOS
memory may have become corrupt. The only way to recover from a corrupted
configuration is to clear it. See "Clearing the CMOS Configuration."