HP Netserver E Server series - Manual (Page 27)

21
4 Accessories
Installing Accessories
This chapter deals with installing those accessories not covered by the
HP NetServer E 45 - E 50 Road Map. If you are installing SCSI mass storage
devices, PCI accessory boards, or ISA plug-and-play accessory boards, consult
the road map. The following accessories are discussed in this chapter:
•
IDE hard disk drive
•
ISA non-plug-and-play accessory boards
Tools
To install options, you will need a flat 1/4-inch flat blade screwdriver and a T15
TORX
® driver.
Installing IDE Devices
The HP NetServer E 45 / E 50 chassis contains six mass-storage shelves: four
front shelves and two rear shelves.
Shelf Location
Accepts
Size Drive Description
1 Front n/a Flexible disk drive
2 Front 3.5 in. or
5.25 in.
IDE CD-ROM drive
3 Front 3.5 in. or
5.25 in.
Optional T4i Tape Backup drive
(in certain models), or empty tray
4 Front 3.5 in. or
5.25 in.
Empty tray
5 Rear 3.5 in. Optional hard disk drive (in
certain models), or empty shelf
6 Rear 3.5 in. Empty shelf