2 working with storage systems, Identifying the storage system hardware – HP StoreVirtual 4000 Storage User Manual

Page 21

2 Working with storage systems

Storage systems displayed in the navigation window have a tree structure of configuration categories
under them, as shown in

Figure 3 (page 21)

. The configuration categories provide access to the

configuration tasks for individual storage systems. You must configure some basic storage system
parameters before using it in a cluster.

Figure 3 Storage system configuration categories

The configuration categories include the following:

•

Diagnostics—Run hardware diagnostic tests, view current hardware status and configuration
information, and save log files.

•

Network—For each storage system, configure and manage the network settings, including
network interface cards (NICs), the routing table, and which interface carries LeftHand OS
communications.

•

Storage—Manage disk RAID and the individual disks in the storage system.

Identifying the storage system hardware

Each HP StoreVirtual storage system is based on a specific HP platform. For general information
about the underlying hardware of your HP StoreVirtual Storage model, such as LEDs, component
identification, and replacing components, see the platform-specific documentation.

Table 4 (page 21)

identifies the HP platform used for each StoreVirtual model and a link to related information.

Table 4 HP platform identification

Link

Documentation

HP platform

HP StoreVirtual model

http://www.hp.com/support/DL320s_UG_en

HP ProLiant DL320s User
Guide

ProLiant
DL320s

NSM 2120

http://www.hp.com/support/
DL185Gen5_MSG_en